‍SK 100 high pressure pump

The HD pump SK 100 is a gear pump for use in fire fighting as well as municipal and construction site vehicles with powerful Power take-offs.

It is possible to retrofit existing vehicles and adapt to the customer's chassis.

‍

Power and torque:

Due to its design and despite the maximum working pressure of 100 bar, the SK 100 is insensitive to the absorption of dirty water with a particle size of up to 0.2 mm.

Another advantage is the possibility of installing the pump directly in the cardan shaft. This means that the pump can also be used in small trucks with weak Power take-offs when driven.

The pressure and delivery volume are set via the setting of various speeds and is infinitely adjustable..

Control:

The SKTEC - PDX control includes drive and motor control as well as a complete sensor-based control system that is controlled via a display and joystick allowing convenient control of the pump drive from within the driver's cab.

Technical specifications:

Driving operation / through drive:

Speed range (ON): max. 3,500 rpm Max. Input torque: 2,800 Nm
Max. Output torque: 2,800 Nm Max. Input speed: 3,500 min-1 Max. Input power: 185 kW
Gear ratio in through drive: 1: 1

Working operation:

Speed range (ON): 300 - 1,800 rpmMax. Input power: 185 kW
Max. Input speed PTO: 1,500 min-1Max. Input torque PTO: 1,200 NmPTO 1: connection SAE B or C

Dimensions and weight:

L: 480 mm x W: 450 mm x H: 250Weight: approx. 80 kg

PLC control module with display 5.4" in Cab